IN
This advanced retaining liquid is formulated to augment or replace traditional press fits, keyways, and snap rings in mechanical assemblies. Upon application to matching metal interfaces, the anaerobic liquid hardens into a tough thermoset plastic that completely fills micro-voids and surface imperfections. This seamless fill prevents fretting corrosion, eliminates micro-movement, and distributes dynamic stress loads evenly across the joint. It allows engineers to relax machining tolerances while maintaining high torque transmission and structural integrity. Ideal for high-vibration automotive drive shafts and heavy machinery housings, it guarantees a permanent seal against fluid leakage and operational displacement.
| Key Attributes | |
|---|---|
| Viscosity Range | Medium |
| Curing Time | 24 Hours |
| Temperature Range | -55 to 150 degrees Celsius |
| Certifications | ISO 9001 |
| Shear Strength | 20 MPa |
| Gap Filling Capacity | 0.15 mm |
| State | Liquid |
| Additional Information | |
|---|---|
| SKU | 00007 |
| Country of Origin | India |
Securing loose bearings into housings and onto shafts to prevent rotational slipping.
Retaining cylindrical sleeves, bushings, and pin joints in heavy industrial machinery.
Locking flywheel ring gears and motor shafts under high torque loads.
Sealing press-fit assemblies to prevent fretting corrosion and fluid leakage.
Reinforcing keyways and splines against wear caused by continuous vibration.
Restoring worn bearing seats and oversized bores during mechanical overhaul.
| Production Lead Time | 4-7 Days |
| Available Stock | In Stock |
| Sample Availability | No |
| Payment Terms |
|
| Payment Methods |
|
| Shipping Internationally | Upon Request | |
| Methods |
| |
| IncoTerms |
| |
| Dispatch Lead time | Ships in 1 Days |
Tamil Nadu, IndiaIt cures rapidly when deprived of oxygen and placed in contact with active metal ions between mating surfaces.
No, anaerobic retainers require metal ions to trigger the polymerization process and will not cure on plastics.
Apply localized heat to the joint using a blowtorch or heat gun to soften the cured polymer before pulling the parts apart.
It is designed to reliably bridge small gaps up to 0.15 millimeters in close-fitting cylindrical joints.
Degrease and clean the parts thoroughly to ensure surfaces are free of oil, dirt, and old chemical residues.
Shipping fee and delivery date to be negotiated. Contact supplier now for more details.
Tamil Nadu, India
