IN
Centrifugal blowers move air or industrial gases using a central rotating wheel fitted with specialized blades. As air enters through the intake suction eye, the spinning impeller draws it in axially and accelerates it outward at a 90-degree angle into the volute casing. The dynamic housing converts air velocity into static pressure, allowing the blower to push air efficiently against resistance created by dampers, filters, and long duct runs. Manufactured with heavy-gauge steel shells, dynamically balanced impellers, and industrial-grade motors, these units maintain stable continuous operation with low vibration and minimal operational noise.
| Key Attributes | |
|---|---|
| Material Construction | Fabricated Mild Steel / Stainless Steel / Cast Iron |
| Static Pressure Range | 50 mm of wg to 500 mm of wg |
| Motor Speed | 2880 RPM / 1440 RPM |
| Operating Voltage | 220V – 415V AC, 50 Hz |
| Drive Type | Direct Drive / Belt Drive Model |
| Impeller Configurations | Backward Curved, Forward Curved, Radial |
| Additional Information | |
|---|---|
| Country of Origin | India |
Supplies direct process air and circulation inside food processing and filling equipment.
Powers dust collection systems by moving dust-laden air through filters and baghouses.
Drives continuous ventilation, cooling, and air change cycles across textile mills and factories.
Extracts hot air, fumes, and vapors from industrial curing ovens, spray booths, and drying units.
Provides high-pressure combustion air to industrial burners and heating boilers.
| Available Stock | In Stock |
| Sample Availability | No |
| Payment Terms |
|
Tamil Nadu, IndiaAir enters the blower housing through the center intake, where a rotating impeller accelerates it outward into the scroll casing, converting speed into static air pressure.
Direct-drive models attach the impeller straight to the motor shaft for compact efficiency, while belt-drive models isolate the motor and allow speed customization using pulleys.
Yes, when paired with open radial blade impellers, centrifugal blowers process airborne dust and debris without clogging.
Standard industrial models operate across static pressures ranging from 50 mm to 500 mm of water gauge (mm of wg).
Blowers are fabricated from mild steel, stainless steel, or cast iron to handle different temperature, corrosion, and structural demands.
Shipping fee and delivery date to be negotiated. Contact supplier now for more details.
Tamil Nadu, India
