Welcome to Pepagora.com, Join FreeSign In
General Purpose Electrode
General Purpose SS electrode
Cast Iron Electrode
Non Ferrous Electrode
Forging Industries
Cement Sugar Industries Carver 9225
Hardfacing electrodes Carver 9580
Hardfacing electrodes Carver 9766
Steel Plants
Ungrouped
Its Free
Cast Iron Electrode Carver - 9755
PROCEDUREClean welding zone. Select lowest amperage possible. Use short arc and guide elecrode steeply since it gives spray transfer, helpful for sealing pores in Cast iron. After each bead peen deposit.
APPLICATIONSWelding or surfacing of Cast Iron. Joining of cast iron to steel. Economical electrode particularly for massive parts and large castings. E.g. repair of foundry defects, damanged or cracked castings. Can be used on rusty, corroded and oil soaked parts. Good bonding properties on difficult to weld cast iron. For obtaining better machinability, deposit final pass with CARVER 9700 Or 9750.
FEATURESCARVER 9755 if for the repair and joining of heavy sections of cast iron. Weld deposits are non-macinable. Designed specifically for on-the-job repairs of cast iron, which eliminates the necessity of dismantling equipment. While preheating is recommended, the electrode may be used without pre-heating or post-heating in many instances.TECHNICAL DATAAlloy Type : Fe, Ni AlloyTensile Strength : 580 N/mm2Machinability : Non-MachinableRECOMMENDED CURRENT RANGESIZE (mm) 3.15 4.00 5.00AMPS 60-110 100-140 140-170
