Ashirwad Enterprises

Other Details

Model: APF-100 MACHINE OPERATING SYSTEM: The Automatic double head augur type dry syrup powder filling machine Model: APF-100, is suitable for filling dry syrup powder in various type and shape of bottles with maximum speed of 60 to 80 bottles minute depending on filling quantity, Bottle neck dia & powder bulk density using single track twin hopper system. Machine with proven Augur type powder filing system for filling higher volume of power in single dose. All parts coming in contact with powder are made form SS316 material. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor from magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle. TECHNICAL SPECIFICATIONS: Output: 60 to 80 Bottles / Min.(Depending Upon the Filling Qty., Bottle Neck Dia,And Powder Bulk Density) Fill Capacity : 5 gm. to 300 gm. or As per Your Requirement. (With Different Set of Auger and Funnel) Direction: Left to right. Power Characteristics: 3 Phase with A.c. Frequency Drive. Container Dia: 25 mm. to 85 mm. Container Height: 55 mm. to 110 mm. Accuracy : + 2% to 3% depending on the powder & humidity control Humidity: Below 30% Rh to be arrange by customer. HIGH LIGHT OF THE MACHINE: Total Gmp Model. No Bottle – No filling system Low air – Machine stop system All contact parts are made of SS316 material Pneumatic Application for Accurate and Speedy Operation. Programmable MMI Unit. Imported sensors are used. Ac Frequency Drive for Conveyor Machine Consists of Two Filling Heads with Hoppers, Single Track Conveyor, MMI Control Unit and Pneumatic Container Holding System. * Specification can be changed as per customer’s requirement