Single Roller H - Type Burnishing Tool

Additional Details

We are a reputed manufacturer and exporter of Single Roller H-Type Burnishing Tool to our esteemed clients that are extensively used for burnishing external diameters. Our tool has widespread usage in burnishing varying job diameters within a limited range. We have positioned three individual rollers in between the outer diameter of the Guide Roller and the cage. Only one roller is used for burnishing operation and the other two rollers remains as spare. Following the usage the rollers can be indexed to put into uses saving the time in changing the spares. We provide necessary spring arrangements to apply the required load on the job for satisfactory results.

Features:

Single roller ‘H’ Type tool is used to burnish smaller size outer diameters

Single tool can be used to burnish

Various sizes of OD

Both plain and stepped shafts can be burnished can be burnished after CNC turning

Specifications:

Single Roller H-Type Burnishing Tool (H-Type SRT)

(For varying outer diameter burnishing for a limited range.)

Burnishing Diameter Range

The minimum recommended outer diameter is 20mm and above. Though there is no limitation on maximum outer diameter we have limited the maximum burnishing diameter of this tool to 75mm.

Burnishing Length

There is no limitation on the burnishing length on Outer Diameter.

Shank

Square Shanks are provided in the standard tools. Also, different shank options are provided for mounting in CNC Lathes and Conventional lathes.

Job Material

Any Ferrous or Non-Ferrous material can be burnished. Normally ferrous materials with a maximum natural hardness of 35HRc are recommended for burnishing operation. Heat Treated jobs are not recommended.

Machine Used

Single Roller H-Type Burnishing Tools can be used in CNC Turning centers and in Conventional Lathes.