Degreasing Chemical

Additional Details

SCALGUN-HT is used for removal of heat treatment scales, heat treatment salts etc. after the jobs are heat treated. Heat treated jobs having various contaminants can be cleaned in SCALGUN-HT bath without loss in hardness or without any metal loss. The parts thus cleaned should then be water rinsed, and dried. Suitable rust preventives, oils, should be applied afterwards to give rust protection.

Note/ Precautions:

Since SCALGUN-HT is highly acidic due care must be taken while handling or using this chemical.

    Always wear PVC/Rubber gloves, aprons and eyeshields
    Any splatters or splashes of SCALGUN-HT or its solution on skin or eyes should be washed off with plenty of water and then consult physician if necessary

Packing: 5 Kgs, 10 Kgs & 35 Kgs

Applications

SCALGUN-HT can be used in Plastic or FRP/PVC lined M.S. Tank or container.

    Prepare 20% - 50% by volume of SCALGUN-HT with water

    Immerse the contaminated parts in this solution for 15-60 minutes at room temperature till parts are completely cleaned.

    Rinse with fresh running water.

    Immerse parts in 1-2% solution of COROBIT-ARP with water at room temperature at 60ºC for 2-3 minutes to neutralise and passivate the parts. Maintain the pH of this solution between 9-10.
    Dry the surface, or dip in ASFOSIL-DW for preserving and protecting them for 3-4 months.