The industrial chimney is fabricated from heavy gauge mild steel plates and structural sections selected based on the flue gas temperature, pressure, volume, and wind load conditions of each installation. The chimney is finished with anti-corrosion paint or high-temperature paint coating to protect against weathering, flue gas corrosion, and outdoor environmental exposure.

The chimney height is determined based on the connected equipment capacity, flue gas volume and temperature, site wind load conditions, and the applicable Pollution Control Board minimum stack height norms for the connected equipment and fuel type. The chimney diameter is calculated based on the flue gas volume flow rate and permissible flue gas velocity to ensure efficient draft and compliant emission dispersion.

Yes, the MS industrial chimney is widely used for flue gas exhaust from industrial boilers, diesel generator sets, furnaces, incinerators, and thermal oil heaters. The chimney design, height, diameter, and wall thickness are customized for each specific equipment type, capacity, and installation site to ensure safe, efficient, and compliant exhaust discharge.

The chimney system includes a flanged base plate with anchor bolt mounting for secure foundation attachment, conical transition sections for smooth flow transitions, support brackets for wall or structure mounting where required, and guy wire anchor provisions for structural stabilization against wind loads in tall and free-standing chimney installations.

Yes, thermal insulation cladding for heat conservation and personnel safety and lightning protection systems including finials and earth conductors are available as optional additions to the standard MS industrial chimney supply and installation scope. Please connect with verified suppliers for complete chimney system specifications, site assessment, and project quotations.