Automation Research Labs

Other Details

OEM Boards are suitable for rapid prototyping and even in regular production. Customers are benefited from our proven hardware and software libraries. Apart from the development support, ARL also offers multiple options for the OEM boards. These boards have been used by many industry customers and are very much suitable for industry environment. Customers can directly use them in end application without worrying for hardware development. As result of our continous research, newer versions are regularly introduced for new features and improvement of existing features. Specifications: LPC2138 / LPC2148 processor with 10MHz crystal USB (available for LPC2148 only) RS232 / RS485 serial interface (Factory option, RS485 only for UART1) Support for alphanumeric and GLCD interface. 4 X 4 Matrix keypad. 4 LEDs for general purpose indications. 2 Digital inputs connected to EINT0 and EINT2 through noise filter and pulse shaper 2 Digital inputs (Potential free contact, sink capacity upto 200mA) SD/MMC and microSD card support over SPI Two SPDT relays with RC snubber Supports add-on 64K capacity non volatile SDRAM board Supports add-on ADC daughter board for 12bit / 16bit / 24bit resolution off chip ADC On board 8 channel analog MUX, buffer and noise filter before ADC On board precision voltage reference for ADC On board negative supply generation for analog circuitry Board operated from external single supply of 12V DC (2pin MKDSN connector for power connections) Multiple options offered for varying needs of customers Bare boards: All ciruits schematics are shared with customer. Customer can solder only components on their own and use the board. custom soldered and tested boards: Not all customers have facility to solder high density SMD components. Customers can get pre-soldered boards with only the components that are really needed for specific application. This will save both time and money. MOQ applicable for this option. Full development set: Customer/ hobbyists get a quick start ARM development kit which includes one fully soldered main CPU board one LCD, one NV RAM add on board, one ADC daughter board with 12 bit ADC one programming cable Sample C code for major peripherals Circuit diagram for all the boards At additional cost, we also offer customization services for all our OEM boards. Apart from adding customer specific features to the board, we also add customer logo and company name to boards and provide the customer, for regular production.