Welcome to Pepagora.com, Join FreeSign In

MDF Hardboard

We are involved in offering a wide range of MDF, which is a type of hardboard made from wood fibres and glued under heat and pressure.

  • FOB Price
    NA
  • Min Order Quantity
    NA
  • Payment Terms
    NA
  • Share:
Request for Quote

Other Details

We are involved in offering a wide range of MDF, which is a type of hardboard made from wood fibres and glued under heat and pressure. These are ideal replacement for plywood or chipboard as MDF is dense, flat, stiff, has no knots and can be easily machined. Made up of fine particles that is painted to produce a smooth quality surface, these MDF are suitable to make display cabinets, wall-panels and storage.

Advantages:

  • Because it is made up of fine particles it does not have an easily recognisable surface grain
  • MDF can be painted to produce a smooth quality surface
  • MDF has no grain it can be cut, drilled, machined and filed without damaging the surface
  • MDF may be dowelled together and traditional woodwork joints may even be cut
  • Can be glued together with PVA wood glue
  • Oil, water-based paints and varnishes may be used on MDF
  • Veneers and laminates may also be used to finish MDF


Disadvantages:

MDF can be dangerous to use if the correct safety precautions are not taken. MDF contains a substance called urea formaldehyde, which may be released from the material through cutting and sanding. Urea formaldehyde may cause irritation to the eyes and lungs. Proper ventilation is required when using it and facemasks are needed when sanding or cutting MDF with machinery. The dust produced when machining MDF is very dangerous. Masks and goggles should always be worn at all times. Due to the fact that MDF contains a great deal of glue the cutting edges of your tools will blunt very quickly. MDF can be fixed together with screws and nails but the material may split if care is not taken. If you are screwing, the screws should not be any further than 25mm in from the edge. When using screws always use pilot holes. Urea formaldehyde is always being slowly released from the surface of MDF. When painting it is good idea to coat the whole of the product in order to seal in the urea formaldehyde. Wax and oil finishes may be used as finishes but they are less effective at sealing in the urea formaldehyde

Images

Email to this Supplier