Hi-Tech Coding Systems Mumbai

Other Details

On-Line Induction Cap Sealing Machine Model No-RSS-2000 H with conveyor as per annexure 1.

Neck size: 50-80 mm diameter

Speeds: up to 30-50 bottles / min.

 

Induction Head Flat Type

Output Power: 2 kilowatt.

 

On-Line Induction Cap Sealing Machine Model No-RSS-1000 H without conveyor

Neck size: 50-80 mm diameter

Speeds: up to 40-50 bottles / min.

 

Induction Head Flat Type

Output Power: 2 kilowatt.

Induction Cap Sealing System Specification Sheet.

 

Control Panel:

Input Voltage:                    230VAC ± 10 % Single Phase

Input Current:                   10 Amperes Max.

Input Frequency:                50 Hz.

Output Power:                   2 Kilowatt

MOC:                                Mild Steel Powder coated

Output:                            up to 30 Bottles/min.

Induction Head:                  Flat Induction Head.

Neck Diameter:                 28mm – 83mm.

Control Interface:               Soft Touch Membrane Keypad with Panel Meter

 

Adjustable Height Stand:

MS Chrome Plated Stand of Range 400mm.

 

Water Cooling System:

    Input Voltage: 230 VAC Single Phase 50Hz
    1/8 Hp Water Pump.
    SS 304 Water Tank of 5 litres capacity.
    Radiator unit with 8” AC fan.
    Water flow sensing switch.

Conveyor:

    Input Voltage: 230 VAC 3 Phase 50Hz
    ½ Hp Geared Motor with VFD.
    Speed: 0 – 60 feet per minute.
    Length: 1.5 Meters
    Height: 850mm ±50mm from ground level
    6” Delrin Slat Chain.
    MS Powder coated Side Covers.

 

 

Safety Interlocks:

 

    No Wad Detection System.

This interlock is used to detect the presence of the Induction Foil in the cap. If the Foil is absent, an audio visual alarm will get activated.

 

    No Water Flow System.

This Interlock is used to detect the flow of water required for cooling the induction coil. If the flow decreases of absent, the machine will deactivate sealing and give off an audio visual alarm.

 

The Sensors used for above interlocks

a)    Proximity and Inductive Sensor for No foil

b)    Flow sensing switch for No Water Flow.

 
 

The Base Support stand will be Mild Steel Powder coated.

The Above base will consist of 4 Level Foot.