GMS

Product Details

• High throughput

  Designed for fast analysis with narrow bore capillary columns, reducing analysis time and improving sample throughput

• Advanced flow Control

  Provides precise and reproducible carrier gas flow and pressure control, essential for accurate retention times and peak areas.

• Maximum pressure

  970 kPa

• Maximum flow rate

  1200 Ml/MIN. Constant linear velocity mode is supported.

• High-Performance Oven

  Ambient + 40C to 4500C with (optional : -500c to 4500C with liquid CO2)

• Dimensions

  280 (W) x 280 (H) x 175 (D) mm

• Volume

  13.7 L

• Temperature accuracy

  Set value + 1% (calibrated at 0.010C)

• Temperature Deviation

  Maximum (on a 200 mm diameter)

• Temperature Program

  Up to 20 ramps (heating & cooling possible), with a programmed rate setting range of -250 to 2500C/min and a maximum total time of 9999.99 minutes. Rapid heating and cooling capabilities are incorporated.

• Injection Units

  Up to two analytical lines can be installed, and various injection units are available.

• Split/ Splitless Injector

  Standard configuration with high-performance AFC, supporting high-speed GC. Features a gas saver function and high-pressure injection mode.

• Direct Injection Unit

  For wide –bore capillary columns (>0.45 mm), with a septum purge flow channel.

• On-Column/Programmed Temperature Vaporizer (OCI/ PTV)

  Temperature programmable (room temperature + 50Cto 4500C),with heating rates up to 2500C/minute and cooling rates down to 500C in 8minutes.

• Automation

  Compatible with the AOC – 20i Auto Injector and AOC-20s Autosampler, handling up to 150 vials for increased throughput. Dual injection systems can be configured.

• User Interface

  Features a back-lit Lcd display for easy monitoring and control.

• Software

  Gc solution software is compatible with windows and comprehensive instrument control, data acquisition, and analysis features, including various quantitation methods, calibration, and reporting.

• Dimensions and Weight

  515 (W) x 440 (H) x 530 (D) mm, approximately 30 kg (for a single FID model)

• Power Requirements

  AC100V/115V/230V + 10%, 1800VA(normal oven) or 2600VA (high-power oven), 50/60Hz.

Images

More Products