Suspension Type Single Girder Overhead Crane

Additional Details

 Under Slung / Suspension Type Single Girder Overhead Crane

• All structural parts of crane are applied with send blasting treatment, single coat of primer and two coats of synthetic enamel paints.
• Epoxy paint and P.U. paints are on request.
• Capacity : Up to 20 ton
• Span : Up to 20 mtrs
• Long level speed : Up to 20 mtrs / min
• Cross travel speed : Up to 15 mtrs /min
• Used when ceiling height of relatively small
• Run under I beam which is fixed under ceiling
• Totally used on shop floor area without any obstruction
• Cost effective
• Best solution for longer span

Design:

CRANOIST electric overhead traveling cranes are designed & manufactured accordance with IS 807, IS 3177 code of practice for design, manufacturing, erection, testing of structural part of the crane and IS 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, wear and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.

 
Bridge Girder:

The bridge girder is fabricated from RSJ / Box type construction in the manufacturing. The maximum deflection of the bridge girder is limited to span / 1000 of the live loads. Bridge girder designed to sustain stress creating due to vertical & cateral forces with impact.