Double Toggle Jaw Crusher

Additional Details

We are an unparalleled name in offering a wide gamut of Double Toggle Jaw Crusher. The offered crusher is used to crush hard and abrasive material. It is manufactured with the help of supreme quality material and cutting-edge technology in compliance with set industry norms. Further, it is strictly checked on different quality parameters assuring its flawlessness at user’s end. Clients can avail this crusher from us in different specifications as per their necessities.

Features:

    Sharp teeth
    Sturdy construction
    Compact size


The crusher is used to crush, hard, abrasive materials and this will crush any minerals. Double toggle jaw crusher in such a way that the sleeping tendency of the materials is reduced to the bare minimum. Jaw stock and location of the hinge point on the center line of the crushing zone enders the motion of the jaw plate is squarely against the material. Material is gripped and crushed immediately and there is almost non rubbing action.

Jaw Crusher differ substantially from other type of crushers. there is no rotary motion in the crushing cycle and all crushing is done by compression of the feed material between two massive jaws. Jaw plate can be either smooth or corrugated.

The moving jaw is so balanced that fully 95% of the drive motor power is used for crushing, while only 5% of the power needed to move the jaws itself. As a result of this high mechanical efficiency, smaller motors may be used, keeping power cost.

Behind the Stationery jaw are shims used to compensate for plate wear and to adjust the closed side setting. For protection from uncrushable, there is also an automatic drive disengagement features that acts instantaneously on the movable jaw assembly.

While one jaw is fixed, the other jaw pivot about a top hinge. The moving jaw is shaped to move firmly and squarely against the material. There is no rubbing or grinding, only compression, which produces a generally cubical product with minimum fines.

ACTPL Jaw crusher accept feed sizes and produce a nominal product size as small. Product Size Is determined by the distance between the lower end of the jaws. This gap dimension may be adjusted by shims behind the stationery jaw assembly. These crushers may be choke fed from hoppers and conveyors.

Jaw Crushers for Glass Cullet:

The basic jaw crusher design is modified for glass cruising by changing to special corrugated plates, called "gullet plates" on to the jaws. These cullet plate meet and intermesh to provide complete crushing of the glass. The product is designed as glass "cullet".