Vial Wet Glue Labeling Machine

Additional Details

With our emphasis on quality and innovation, we manufacture superior quality Vial Wet Glue Labeling Machine. These are available with various high-end features like no ampoules no labels and no label printing systems over printing devices. Fitted with A.C. frequency drive digital counters, these can be availed with the optional accessories like digital speedometer and vacuum pump.

Specifications:

Electrical Rating: 1 HP gear motor, 1 HP 415 volts, 3 phase, for vacuum pumps

Power Characteristic: 415 volts, 3 phase, 4 wire systems, 50 cycles/sec

Finish/Painted: S.S. Finish

Dimensions: 1530 x 1650 x 1280 mm (L x W x H)

Net Weight: 800 kg

Output/hour: 10000 TO 12000 objects

Ampoules Size: 9.5mm to 17 mm

Label Length: 25mm to 50 mm

Label Height: 21 mm to 50 mm  

Mode of Operation & Description:

The machine labels Ampoules and other Cylindrical containers with diameter from 10mm minimum to 17mm maximum and with a cylindrical body height for min 22mm to max. 130mm

It uses ready-cut labels from stack from a width of 18mm minimum and a length of 25mm minimum to a width of 50mm maximum and length of 50mm maximum

The rated output is 200 containers per minute maximum. It is recommended to use labels of 52 to 55 gsm to achieve rated output. The mechanical machine speed is variable up to this rated output

The Loading Screw releases containers into a Transfer Wheel in which containers each held between a pair of rollers and back up guide are passed to the labeling station in a upright position

The labels are taken from the stack in a label box.  The glue segment coated with glue by a rubber roller takes the label by means of adhesion out of oscillating Label box and moves them to the labeling cylinder

With its mechanically actuated fingers the labeling cylinder takes over the glue coated labels which are at the same time held by vacuum and passed them to the container

At the instant when the label touches the containers, the vacuum is released and label is glued to the container

The labeled containers from the Transfer Wheel are pushed into a unloading tray