Additional Details

Color Coated Roofing Sheets SuppliersWe are leading manufacturers, and suppliers of a comprehensive range of color coated roofing sheets. Advanced technical equipment is used by us for manufacturing these sheets. Color coated roofing sheets in various colors, sizes, heights, thickness and coatings are offered by us. They are also custom made depending on the requirements of the customer. 

Roofing sheets offer protection and ample amount of ventilation at lower costs. They are made using galvanized steel. The standard finished sheets offered by us are:

The standard finished sheets offered by us are:

• Al-Zn Alloy Coated Steel (Bare Galvalume)
• Pre Painted Galvanized Steel (PPGI)
• Color Coated Al-Zn Alloy Coated Steel (Color Coated Galvalume)

Technical Specifications

• Tensile strength: 240 to 540 Mpa
• Coil width: 1220mm
• Thickness: 0.3mm to 0.8mm
• Pitch: 200mm

Recommended Thickness:

• Al-Zn alloy coated steel (550 Mpa)                                        : 0.47mm TCT
• Pre Painted Galvanized (240 Mpa)                                        : 0.47-0.50mm TCT
• Color Coated Al-Zn Alloy Coated Steel (550 Mpa)              : 0.47-0.50mm TCT

Features:

• Colors and coatings of a wide range are available
• Reliable and strong body
• Corrosion resistant
• High quality and low cost

Technial Specifications of Pre-Painted Galvanized Steel Sheet(PPGI)

	Substrate	:	IS: 513 Cold Rolled Steel Coils.
	Tensile Strength	:	240 Mpa
	Galvanizing	:	IS:277/JIS:3302
	Zinc Coating	:	Pure Lead Free Zinc 120 GSM (both side mass).
	Pre-Painting	:	IS: 14246/JIS:3312
	Type of Coating	:	RMP/SMP
	Total Coated Thickness(TCT)	:	0.47 mm – 0.50 mm
	Tolerance	:	+0.03 as per IS:513

Technical Specification of Aluminium Zinc Alloy Coated Steel Sheet

	Combination	:	55% Aluminium 43.4% Zinc & 1.6% Silicon
	Coating Std	:	ASI397 – 1993
	Material	:	Bare Galvalume-ASTM A792M
	Coating Mass	:	AZ 150
	Base Metal	:	High Tensile Steel
	Tensile Strength	:	550 Mpa
	Total Coated Thickness(TCT)	:	0.47 mm – 0.50 mm
	Tolerance	:	+0.04 As per AS/NZS 1397

Material

	Material	Yield  Strength	Total Coated Thickness
	PPGI	240 Mpa	0.47 – 0.50 mm
	Bare Galvalume	550 Mpa	0.47 mm
	Colour Coated Galvalume	550 Mpa	0.47 – 0.50 mm

Ietc Steel – RIB

Available Finishes

• Pre Painted Galvanized Steel (PPGI)

• Al-Zn Alloy Coated Steel (Bare Galvalume)

• Colour Coated Al-Zn Alloy Coated Steel (Colour Coated Galvalume)

Recommended Roof Slope

After a comprehensive research, the Metal Building Manufacturers Association (MBMA) has suggested roof slope of about 1:10 as best matched and ideal for steel roofing sheets and we follow this standardization process. Our designers and technicians choose the appropriate slope, keeping in mind the factors like heat dissipation, energy conservation, environmental impacts and operational requirements..

Recommended Thickness

Applications

Used as Roofs and wall cladding in

• Factory buildings, warehouses and workshops
• Garages
• Institutions Laboratories
• Spinning Mills
• Large Spaces
• Service centers
• Car parking sheds
• Super markets
• Homes
• Shops
• Community halls
• Auditoriums
• Institutions
• Parking Places
• Textiles
• Office buildings
• Showrooms