Clean Room Modular Partition Ceiling Panels

Additional Details

Clean Room Modular Partition Ceiling Panels offered by us are used in rooms in which concentration of air born particles needs to be controlled. Further, these also assist in controlling air’s physical properties like Temperature, Humidity & Pressure. Also called sandwich Panels, these are required for minimizing introduction, generation, retention of contaminated particles inside the room.

Controls on physical properties required for specified products:

    Temperature
    Humidity
    Pressure

Clean Room Contains:

    Partition wall Panels
    Plane panels
    View panel
    Inbuilt Riser Panel
    Ceiling Panels
    Clean Room Doors
    Coving
    Risers
    Hepa filter housing
    Hepa filters
    Clean Room Equipment

 A) Partition Wall Panels-(plane):
MOC:

    P.C.G.I. ( Pre Coated Galvanize Iron)
    Aluminum
    Stainless Steel (304)
    Construction- Factory Fabricated Double Skin Sandwich panels
    Insulation - Polyurethane Insulation
    Density - 40 kg/ m3
    Installation - Male ¿ Female attachment
    1200x2400 , 1200x3000 , 1200x4000 mm or 1200x size required by customer up to 4 mt.

B) Partition Wall Panels-(Inbuilt Riser):

MOC:

    Construction, Insulation, Installation & Size (Same as 1A)
    Inbuilt Riser Duct (400x 80, 600x80) MOC of duct - G.I. ¿ 14 Swg
    M.S. Powder coated Grill
    1C) Partition Wall Panels-(View Window)
    Moc, Construction, Insulation , Installation & Size ( Same as 1A)
    View window of size 900 (w) x 900(H) MM Toughen Glass
    Silica Gel for create vacuum between two glass

 Ceiling Panel:

MOC:

    Construction, Insulation , Installation & Size ( Same as 1A)
    MS Suspension rod with accessories for ceiling panels
    Cut outs for Hepa , Tube light & Return ( if required)

 Clean Room Doors:

MOC:

    Construction, Insulation ( Same as 1A)

Accessories:

    Door closer ( Dorma Make)
    Ball bearing Hinges 5Â
    Door seal
    Door Handle ( 10”)
    Tower Bolt ( for Double Door)
    Door Frame
    View Window ( 700 x 500mm)
    Gasket
    Door Lock
    Types of Door
    Single Door
    Double Door

Sizes:

    750 x 2100(h) mm
    900 x 2100 (h) mm
    1000 x 2100(h)mm
    1200x 2100 (h) mm
    1500x 2100 (h) mm

 Coving- : Aluminum / PVC Extruded covings

 Grills -: M.S. Powder coated

Physical Properties:

    Sheer strength - 2.0 kg/ cm2
    Bending strength - 2.0~5.0 kg/ cm2
    Tensile strength - 3.0~5.0 kg/ cm2
    Temp Range - -196 0c/ +230 0c