Ceramic Encased Wire Wound Resistors (Type: CE)

Additional Details

We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire We are amongst the paramount manufacturers ans suppliers of an exhaustive collection of Ceramic Encased Wire Wound Resistors (Type: CE). These are manufactured using superior quality components that are acquired from certified vendors of the industry. Moreover, these are available with us in different sizes and specifications meeting diversified demands of the clients. The construction of these are as follows: In single layer our resistor is wound on superior quality ceramic core We use nichrome or eureka wire of low temperature coefficient To achieve reliable contact, wire ends are spot welded to leads The resistor element is housed in another square shape ceramic tube or boat The ends are sealed The technical specifications of our resistors are mentioned below: Temp coefficient: ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Ohmic range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Surface temperatures: 300°C maximum Derating: Derates to zero at 350°C Terminations: 0.8 mm tinned copper wire Power ratings: 2 to 20 watts at 70°C ambient Construction: The resistors are wound on special quality ceramic core in single layer by using nichrome or eureka wire of low temperature coefficient. The wire ends are spot welded to leads thereby achieving reliable contact. The resistor element is housed in another square shape ceramic tube or boat and the ends are sealed. Specifications: Ohmic Range: 0.1 E - 50k Tolerance: ±1%, ±2%, ±5% Power Ratings: 2 to 20 watts at 70°C ambient Temp coefficient ± 150 PPM high value ± 50 PPM middle value + 150 PPM low value Surface Temperatures 300°C max Derating Derates to zero at 350°C Terminations 0.8 mm tinned copper wire