C Shaped Ceiling

Additional Details

C Shaped Ceiling

Flexible and convenient installation dozens of colors available. The C shaped strip ceiling consist of plain plate and punching plate. The length reaches 6000m, as well as processing catering to clients demand. The Ceiling plate with width 75, 100, 150, 200 mm C-shaped strip ceiling can be combined at will without any gap. The product is suitable for various kinds of building , widely used airport, subway, station, Bank, Exhibition center, office building, large meeting room etc.

Specification

Metacil 150C ceiling systems comprises of powder coated panels 150mm wide x 15.5mm deep with bevelled groove between panels formed out of aluminium coils with total coated thickness of 0.5mm (TCT). Panels are fixed on to roll formed carriers 20mm wide x 28mm deep out of 0.45mm galvanized steel with cut outs to hold the panels in module of 150mm at maximum 1.2 m c/c. Carrier are fixed perpendicularly to main keel 38mm width x 15mm deep x 0.5mm thick at max 1.6mtr c/c with the help of carrier host. Main keel are suspended from the roof or truss by 6mm diameter. Galvanized steel threaded rod hanger with special height adjustment suspension clip at max. 1.5m c/c. Hangers are fixed to the roof by fasteners. Panels are factory cut in length up to maximum 6m to sit site dimensions or shop drawing. Edge profile or wall angles are 24mm x 24mm x 0.4 mm thick and match the colors of panels. 

If the strip plate is too long and needs joints to carry forward, then cut the strip plates about 10-20cm, gently press then into the boards to form joints to ensure smooth and flat surface effect.

Adjust position of both boom and 38# light keel, each 38# light keel is 1.2 -1.5 meters, then use clips to connect the special keels at an interval of 80cm onto the light steel keel (the boom usually at 1.5 meters) or use the boom and spring clip to set the levels along the transverse, the keel space is 80cm (boom space is 1.5 meters)

After setting the level for the keel, make use of the elasticity of the guess set place itself to directly press into position in the keel , ( be sure to ensure the naturally smooth board surface, which does not require re-direction)