Bacteriological Incubator GMP Model

Additional Details

This Bacteriological Incubator GMP Model is made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller. Specifications: Triple Walled construction Inner made of S.S.316 Mirror polished Outer made of S.S.304 Dull finish Gap Between the two walled filled with glass wool insulation of 65 mm Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing Heaters are placed at the right & left side of the inner chamber PID Controller with auto tuning facility with double display to view set & current temp. Temp. Range 5 C above ambient to 60 C with accuracy of ± 0.5 C. Silicon rubber gasket fitted on door to prevent lost of heat. Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali. Optional Accessories: Digital Timer to cut off the heater at set interval. PID Controller with Printer interface to record. Set Valves & actual valves data & Time. 80 Column DOT MATRIX Printers. Safety controller with alarm for Temp. Overshoot. Single 4 point/8 point data logger Bacterogical Incubator GMP Model Available in Below Sizes: Inner Size Size in Inches (W X D X H) No.of Shelves Capacity In LTR Rating Watts 12"x12"x12" 1 27 250 14"x14"x14" 2 42 300 18"x18"x18" 3 90 400 18"x18"x24" 4 120 700 24"x24X"24" 4 215 1000 24"x24"x36" 5 320 1500